Before you buy
Two quotes can name different numbers for what looks like the same film. Here is what each number measures, why two quotes can differ, and what the numbers do not tell you.
The share of the sun’s energy that the glass and film together turn away. It counts reflected energy plus the absorbed energy that is re-radiated outward. Higher means less solar energy gets in.
The fraction of the sun’s energy that actually passes through. It is a number between 0 and 1. Lower means less solar heat gets in.
How much visible light passes through the glass and film. Lower means a darker window.
The percent by which visible light is reduced by adding the film. It is worked out from the glass’s visible light before and after the film.
The share of ultraviolet energy kept out. UV is a main driver of fading, but not the only one.
Quick answers
There is no single good number. TSER is one of several numbers that matter, along with visible light and glare reduction, and it depends on the film and on your glass. Ask for the manufacturer’s spec for the named film on your glass type.
They are two views of one measurement. A manufacturer’s definitions give SHGC as 1 minus TSER. A high TSER goes with a low SHGC.
The sheet’s numbers are usually measured on clear glass of a stated thickness. Your glass may differ, and a range such as ‘up to’ is a best case. Ask which glass the number was measured on.
Our top priority is to understand what you’re looking for and find the best film options for you based upon your needs as well as the windows that you have.