Guide

Window film types, compared.

Window film comes in a handful of types, and the type usually matters more than the brand. Each one looks different from the street, does a different job in the room and suits different glass. Here is what each type is, where it fits and what it trades away.

The types at a glance

Swipe the table sideways for every column →

Window film types at a glance
TypeFrom outsideFrom inside after darkDaytime privacyMain job
Dual-reflectiveReflective finishSome reflectionModerate to maximum, depending on shadeHeat rejection with one-way daytime privacy. Darker shades give more privacy, lighter shades less.
Dark neutral (charcoal)Less reflective charcoal toneA darker view outModerate to maximum, depending on shadeDaytime privacy and glare control, with some heat rejection, in a less reflective charcoal tone from the outside. Darker shades give more privacy, lighter shades less.
CeramicClose to untreated glass, or a light tintClearCase by caseHeat and glare control while the glass still looks like glass.
Spectrally selectiveNearly clearClearNoHeat rejection while the glass stays nearly clear.
Decorative & frostedFrosted, etched or patternedFrosted: no view in or outYes, day and nightPrivacy day and night, while the light still comes through.
Security & safetyClear, or tinted when combined with solar controlClearNo, unless tintedHolding broken glass together.
Anti-graffitiClearClearNoTaking the scratches and tags instead of the glass.
Turf protectionA little different from untreated glass (exterior film)View out is little changedNot its purposeStopping reflected sun from melting artificial turf.

Only decorative and frosted film gives privacy at night with the lights on; for the solar types the privacy effect goes away after dark. Two more you may hear about: Low-E film, a light, slightly reflective film that reduces some winter heat loss through the glass (the effect is most noticeable on single-pane glass), and exterior film, installed on the outside of the glass for jobs interior film cannot do. We fit both where the glass calls for it.

Dual-reflective

Heat rejection with one-way daytime privacy. Darker shades give more privacy, lighter shades less.

Outside: Reflective finishInside at night: Some reflectionDaytime privacy: Moderate to maximum, depending on shade

What it is

A metallized film with a reflective finish on its outside face and a less reflective inside face. In daylight the street sees its own reflection; you look straight out. These films come in a range of shades. Lighter shades give moderate, semi-private daytime privacy and darker shades give maximum daytime privacy, so we show you samples on your own glass.

Where it fits

Rooms that overheat in the sun, street-facing rooms and windows that face a neighbor, where you want the blinds open during the day.

The trade-offs

The reflective finish is visible from outside, and some HOAs regulate it. After dark with the lights on, the privacy effect goes away. Darker and more reflective films heat the glass more, so dual-pane units are checked first.

Daytime privacy film →

Dark neutral (charcoal)

Daytime privacy and glare control, with some heat rejection, in a less reflective charcoal tone from the outside. Darker shades give more privacy, lighter shades less.

Outside: Less reflective charcoal toneInside at night: A darker view outDaytime privacy: Moderate to maximum, depending on shade

What it is

A darker film with a charcoal tone and a less reflective finish from the outside. Your glass type and its coating can still add some reflection on the outside in bright light. These films come in a range of shades. Lighter shades give moderate, semi-private daytime privacy and darker shades give maximum daytime privacy, so we show you samples on your own glass.

Where it fits

Daytime privacy and glare on homes where a more reflective look would feel out of place, or where the HOA limits exterior reflectivity (check your HOA’s rules).

The trade-offs

It makes the room darker than a light film would, and the view out has a darker tone. Like every daytime privacy film, the privacy effect goes away at night with the lights on.

Daytime privacy film →

Ceramic

Heat and glare control while the glass still looks like glass.

Outside: Close to untreated glass, or a light tintInside at night: ClearDaytime privacy: Case by case

What it is

A non-metal film built with ceramic particles. Low reflectance on both sides, so from the street the window looks close to untreated, and there is no metal layer to corrode.

Where it fits

Homes and offices that want less heat and glare without changing how the building looks, and rooms where the view matters.

The trade-offs

For the same darkness it usually costs more than a metallized film.

Heat, glare & fading film →

Spectrally selective

Strong heat rejection while the glass stays nearly clear.

Outside: Nearly clearInside at night: ClearDaytime privacy: No

What it is

A film engineered to reject the infrared part of sunlight, which carries much of the heat, while letting most visible light through. It breaks the usual rule that a darker film rejects more heat.

Where it fits

Great rooms, window walls and view windows where you want the room to stay bright and the glass to look clear, and storefronts where the display has to stay visible.

The trade-offs

It gives no privacy. Glare drops less than with a darker film, because more visible light still comes through.

Heat, glare & fading film →

Decorative & frosted

Privacy day and night, while the light still comes through.

Outside: Frosted, etched or patternedInside at night: Frosted: no view in or outDaytime privacy: Yes, day and night

What it is

A translucent film that diffuses light instead of darkening or reflecting it. It comes as a full frost, a gradient, bands or a cut pattern, so you can frost only the part of the glass that needs it.

Where it fits

Bathrooms, entry sidelights, street-level bedrooms, closet windows and glass office partitions.

The trade-offs

You lose the view through the frosted part. On its own it does little for heat; where heat matters too, it is paired with a solar film on other windows.

Privacy & frosted film →

Security & safety

Holding broken glass together.

Outside: Clear, or tinted when combined with solar controlInside at night: ClearDaytime privacy: No, unless tinted

What it is

A thick, clear film bonded to the glass. When the glass breaks, the film holds the pieces together instead of scattering. Where the windows allow, an attachment system helps hold the film and glass in the frame.

Where it fits

Storefronts, ground-floor and street-facing glass, schools and offices, and glass doors anchored with Z‑Secure.

The trade-offs

It helps hold broken glass in place, which is meant to slow a first intrusion; it does not make glass unbreakable. On a door the attachment matters as much as the film: silicone to the glazing stop is not enough.

Security film →

Anti-graffiti

Taking the scratches and tags instead of the glass.

Outside: ClearInside at night: ClearDaytime privacy: No

What it is

A clear sacrificial film over glass, mirrors or polished metal that get vandalized. When it is scratched, etched or tagged, the film is replaced and the glass underneath is untouched.

Where it fits

Storefronts, transit and bus shelters, restrooms, elevators, mirrors and polished or brushed metal.

The trade-offs

It is a wear layer, so expect to replace damaged sections over time. That usually costs less than replacing the glass.

Anti-graffiti film →

Turf protection

Stopping reflected sun from melting artificial turf.

Outside: A little different from untreated glass (exterior film)Inside at night: View out is little changedDaytime privacy: Not its purpose

What it is

An exterior film that reduces the heat in the sunlight reflecting off a window. Coated dual-pane glass can bow slightly, and the reflection can get hot enough to melt artificial turf or warp vinyl.

Where it fits

Windows that face artificial turf, vinyl fencing or a neighbor’s siding.

The trade-offs

It goes on the outside of the glass, so it is exposed to weather and typically wears faster than interior film. It changes the outside look of that window.

Turf protection film →

Which type might fit your situation

Most situations have more than one answer. These are common starting points, and we confirm the right one by looking at your glass.

Many homes end up with more than one: a privacy film on the street side, a clear film on the view side. We carry several manufacturers’ lines in each type, so once the type is settled we pick the film within it that suits your glass.

A word on the numbers

Every film has a spec sheet. Three figures matter most: visible light transmitted (how much light gets through; lower is darker), total solar energy rejected (how much of the sun’s heat is kept out; higher is cooler) and glare reduction. How to read a spec sheet →

Those figures are measured on a single pane of clear glass, so every film is tested the same way. Many homes have dual-pane glass, often with a Low-E coating, and that can change the numbers. On an estimate we name the exact film and show its published figures for your glass.

Darker and more reflective films also heat the glass more. On dual-pane units we check the glass and stay inside what the window manufacturer allows. Why that matters →

Common questions

Which type of window film is best?

There isn’t one film for every window. The right choice depends on what you want to achieve and the problems you are currently facing.

  • Daytime privacy: dual reflective or neutral film, in a shade that gives the privacy you want.
  • A house that looks about the same from the outside: ceramic or spectrally selective film.
  • Privacy at night too: frosted or decorative film.
  • Sun reflecting off your windows onto your lawn or fence: turf protection film.

Choosing the right type for your windows usually matters more than choosing a brand. We’ll bring samples so you can see the options before you decide.

Will my windows look like mirrors?

A reflective finish comes from a dual-reflective film, and only from outside in daylight. Darker shades give a stronger reflective one-way effect, and lighter shades a softer reflective finish. Dark neutral films have a less reflective charcoal tone and a less reflective finish (the glass and its coating can add some reflection in bright light), and ceramic and spectrally selective films look close to untreated glass. We put samples on your window so you can see each one from the street before you choose.

Which film types give privacy at night?

Only decorative and frosted film. A dual-reflective or dark neutral film gives privacy only while it is brighter outside than in; after dark with the lights on, the privacy effect goes away. For privacy around the clock, use frosted or textured film.

Does a darker film always keep out more heat?

Usually, but not always. Spectrally selective films are made to reject the infrared part of sunlight, so a nearly clear one can keep out more heat than a darker film. Compare films of similar darkness, and ask for the figures on your glass.

Is every type safe on dual-pane windows?

Not every film on every unit. Darker and more reflective films raise the temperature of the glass more than clear ones, so we check the window type and coating and recommend a film the window manufacturer allows. How we check.

Not sure which type you need?

We bring samples of each type and put them on your glass. Free, on site.

Get a quote