Residential security window film

Reinforce your windows against impact and slow down forced entry

Security film is a clear, heavy layer applied to your existing windows. The glass can still break, but it stays together in the frame instead of leaving a hole. It’s most often used on sliding doors, ground-floor windows and the glass beside the front door, and most homes are done in a day.

Utah S230 licensed and insuredUtah owned and operatedFree on-site estimates

How it works

How security film works

Security film is a clear polyester layer, several times thicker than solar film, applied to the inside of your existing windows. The glass still breaks when it’s hit, but it stays bonded to the film as one sheet instead of falling out of the frame. Getting through takes repeated, noisy effort, which is what someone trying to get in doesn’t want.

On homes the film is almost always clear, so your windows look the same from inside and out. It goes on the glass you already have, with no replacement and no construction.

Intact glassNo filmWith film(glass breaks but is held together)
The glass still breaks. The difference is what happens next.

Looking at this for an office, store or building instead? The commercial security film page →

What it does

What security film protects against

Security film does a few different jobs. Which one matters most to you decides the thickness.

Forced entry

Keeps broken glass in the frame, so getting through is slower and louder.

Accidental breaks

A ball, a fall against a patio door or a kid’s elbow. The glass cracks and stays together instead of falling in pieces.

Storm debris

Keeps broken glass out of the room until the pane can be replaced. It is not a storm-rated system.

Flying glass

Cuts the risk of injury from glass that shatters.

Where it goes on a house

The openings that matter

Security film on every window of a house is rarely the right spend. These are the openings where it earns its place.

Sliding patio door

Large, at ground level, and often at the back of the house, out of the street’s view. It’s one of the first openings we look at. A sliding door is often the largest single pane on a house, and it is usually the easiest to reach from the yard.

Ground-floor and basement windows

Especially window wells and anything behind a fence. Film on a locked window makes entry slower and louder. They are often within easy reach from outside, so they are worth a look even when the rest of the house is well covered by film.

Sidelights and door glass

The narrow window beside the front door lets you see out. It’s also the glass someone could break to reach the deadbolt. Film keeps the broken glass in the frame. It sits right beside the entry, so it is one of the openings we look at closely on a visit.

Garage doors and windows

Garage windows and the glass panels in many garage doors can be a way in to the tools, bikes and valuables stored there, and from the garage into your home. Film keeps broken glass in the frame, which makes entry slower and louder. We also look at the glass in the door between the garage and the house.

Bathroom windows

Bathroom windows near a shower or tub may not be tempered glass, which building codes often require in those spots. Security film can be a practical alternative to replacing the window, depending on the film and your local code. Check with your building inspector to confirm what they accept. It also keeps the glass together if it breaks.

Kids’ rooms and play areas

Nurseries, playrooms and low bedroom windows can get hit by a ball, a toy or a fall. Film holds broken glass together instead of letting it drop into the room, so there are fewer sharp pieces on the floor, the bed or the play area. It’s worth considering for any window a child can reach.

Thickness and attachment

Three thicknesses, and an option to hold it in the frame

Security film thickness is measured in mils (1 mil is 0.001 inch). We choose by opening and by what you want the film to do.

Safety, 4 mil

Keeps broken glass together after an accidental break, like a ball, a fall or flying debris. Used on kids’ rooms, interior glass and windows away from doors.

Security, 8 mil

A thicker film that makes forced entry slower and louder, because the broken glass stays in the frame. Used on patio doors, sidelights and ground-floor windows.

Heavy security, 15 mil

Added durability and shatter resistance for openings that need more than 8 mil. We choose it opening by opening, based on your windows and what you want the film to do.

Drawings show relative thickness, not actual size.

Attachment, where your windows allow it

Film alone holds broken glass together. On some windows we can also bond the filmed glass to the frame, so it stays in place longer if it’s hit. Homes often have little frame to attach to.

1. Film only, no attachment Cross-section of a glass pane standing in its frame. Security film covers the room-side face of the glass, adding strength and rigidity and keeping the glass in one piece. Nothing ties the filmed glass to the frame. 1 Film only No attachment impact film glass frame Adds strength, rigidity, and keeps glass in one piece
2. Wet glaze, a bonding bead Cross-section of a glass pane standing in its frame. Security film covers the room-side face of the glass down to the frame. A triangular bead of sealant fills the corner between the film and the frame, bonding the filmed glass to the frame. 2 Wet glaze Bonding bead at the edge impact film glass bonding bead frame The bead bonds the filmed glass to the frame
3. Mechanical attachment, a rail over the filmed glass Cross-section of a glass pane standing in its frame. Security film covers the room-side face of the glass. A rail is fastened to the frame and presses against the filmed glass, holding the filmed glass in the frame. 3 Mechanical Rail over the filmed glass impact film glass mechanical rail frame Attachment holds filmed glass in the frame

Cross-section through the edge of a window. Cyan is the security film; hatched teal is the attachment; the red arrow is an impact from outside. In (1) nothing ties the pane to the frame. In (2) a bead bonds the filmed glass to the frame. In (3) a rail holds the filmed glass in the frame. Which one fits depends on your windows.

Not sure which one? We’ll walk your windows with you.

Get a free estimate

Straight answers

What residential security film will not do

We would rather you knew these before you bought it than after.

It will not stop a determined person

It makes entry slow, loud and obvious. Against someone with time and tools, it buys time, not immunity. Layered with a lock, lighting and an alarm, each one makes the others more effective.

It will not make the glass bulletproof

No film does. Ballistic glazing is a different product with a different price. We will tell you that rather than sell you film for a job it cannot do.

It will not fix a bad frame

A patio door that lifts out of its track is not a glass problem. We’ll point that out on the estimate. The fix is usually simple, like a track block or a pin.

It is not a solar film

Clear security film isn’t made for heat or glare, though some security films also block UV and cut some heat. If heat and glare are also a problem, there are combination films, or different films on different openings. We specify by opening, not by house.

The visit

What the consultation looks like

Free on-site estimate

We look at the actual glass, ask which rooms bother you, and bring samples. About 30 minutes for most homes, and 45 to 60 minutes for larger properties.

You pick, we schedule

Two or three options with the trade-offs stated. No pressure and no same-day-only pricing.

Install

We lay down protection, detailed window cleaning, and clean up as we go. Most homes are one day. We ask that you clear the space around your windows beforehand.

Cure and care

Plan on about 30 days before cleaning the glass, which is typical manufacturer guidance. Haze or small water pockets can show for the first few weeks, and cooler or cloudier weather slows curing. We’ll give you the cure window for your film at install.

What it costs

What security film costs

Price depends on the number and size of your windows and doors, the thickness, whether attachment is used, and whether old film needs to be removed. The estimate is free.

Residential security film FAQs

What homeowners ask on the estimate

Can you see it?

No. Residential security film is clear. Once installed and cured, it’s very hard to tell from untreated glass, inside or out.

Does security film prevent break-ins?

It doesn’t make a window impossible to break. It keeps the broken glass in the frame, which makes getting through slower and louder. It works best alongside locks, lighting and an alarm.

Do I need attachment?

It depends. For some people the film alone is enough added protection and strength. If you want the maximum protection and resistance to breaking, you’ll want an attachment system. How much attachment you need depends on the level of strength you’re looking for, and your specific windows determine the exact type of system we use.

What thickness do I need?

The most commonly installed thicknesses are 8 to 15 mil, though the right choice depends on your needs and what you want the film to do. 4 mil is used for accidental breaks and flying glass. We recommend by opening on the estimate.

Can it go on windows I already have?

Yes. It’s applied to the inside of your existing windows, with no replacement. We check your glass type and unit first.

Does it go on dual-pane windows?

Yes, security film is compatible with dual-pane windows. We still check the unit type and coating before we install.

Will it change how the window opens?

No. The film is on the glass only. Sliders, casements and double-hungs work as before.

Does it block UV?

Some security films also block UV, which helps slow fading. Clear films do much less for heat and glare. If you want both, ask about combination films.

What about storms and hail?

Film holds broken glass in the frame, which keeps weather out and glass off the floor until the window is replaced. It is not a hurricane-rated system; Utah does not require one.

Does it replace an alarm or locks?

No. It slows entry and keeps the glass together. It works with locks, lighting and an alarm, not instead of them.

Is there a warranty, and how long does it last?

Warranty length varies by film. We’ll give you the duration and the manufacturer’s warranty documentation in writing. Installed correctly, quality film is made to last for years.

How long does installation take?

Most homes are one day, depending on how many openings.

How much does it cost?

Price depends on the number and size of your windows and doors, the thickness, whether attachment is used, and whether old film needs to be removed. The estimate is free.

Related

Other film we install on homes

Film the doors first.

Free in-home estimate. We will tell you which openings need it and which do not.

Get a free in-home quote